| If you're looking for a way to add a bit of class to | | | | molding is to measure the molding and make your |
| the rooms in your home, crown molding is the way | | | | cuts first. This should be done before you begin |
| to go. Whether it's a small room or a large room, you | | | | putting up the molding. This way you can dry fit the |
| are sure to get a great look when you decide on this | | | | molding to ensure you have the right measurements. |
| do it yourself home improvement project. Of course, | | | | Once you know that the molding fits, then you can |
| you'll definitely end up paying a nice chunk of money | | | | work on painting it. It's a great idea to paint it before |
| to do the project, but the results are incredible. | | | | you put it up, since it's much easier to paint it before |
| Whether you choose to go with very simple crown | | | | you have it up there on the ceiling. |
| molding, or you go with very intricate options, adding | | | | It's also a great idea to mark the studs before you |
| crown molding to a room can add some architectural | | | | start installing the crown molding. While most molding |
| detail that looks very elegant. Usually you'll find that | | | | is not that heavy, over time it could begin to come |
| this molding is made out of maple, pine, or oak, and | | | | down if you don't have it in the studs. If you mark |
| it's definitely not cheap. Not only do you need to | | | | the studs first, this will allow you to make sure you |
| think about the cost involved, but think about the | | | | have something solid to nail into when you are |
| installation as well before you decide to do this | | | | putting it up. |
| project. | | | | The right adhesive is very important as you install |
| Installing the corn modeling on your walls can be a | | | | crown molding as well, especially if you are using |
| difficult job, although it definitely adds class to the | | | | foam molding. Some adhesives can eat right through |
| room. You'll need to cut joints that need to be | | | | foam molding and will damage it. Ensure that you get |
| perfect, and if you make a mistake, you'll end up | | | | the adhesive that the manufacturer of the molding |
| having to start all over again, which means any | | | | you choose recommends for the best results. |
| mistakes will be expensive. Of course, there are | | | | If you use these tips, you can make sure you do a |
| some tips that can help you if you are going to install | | | | good job installing the crown molding in your home. |
| this molding so you avoid as many mistakes as | | | | Although it will take some work and cost you some |
| possible. | | | | money, once you have it up, you'll definitely love the |
| One important tip to use when installing crown | | | | way it makes your home look. |