How to Clean Block Paving

Block paving is a beautiful addition to a housepeople disagree with jet washing block paving since it
whether it is on a patio, walk or driveway but overwill remove some sand from joints however; it is not
time, it becomes faded, stained and overgrown.that hard to reapply the sand after the cleaning
Cleaning block paving can quickly and inexpensivelyproject is completed. A useful tool for cleaning block
restore the beauty and life of a block paving project.paving is a rotary pressure washer head used in
Many companies who install block paving also offer aconjunction with a jet washer.  Many tool hiring
cleaning surface, which restores the surface withoutshops have both jet washers and rotary head
the need to purchase new tools or large bottles ofattachments available for hire. A rotary flat surface
chemicals. For the do-it-yourself homeowner, cleaningwashing head keeps water splashing to a minimum,
block paving is a weekend job that provides realconserves water and directs the water flow more
satisfaction without backbreaking work. The total jobprecisely at the surface. Using a jet washer will
may take anywhere from a few hours to a fewremove smaller weeds, stains and dirt without the
days depending on the size of the block paving areaneed to scrub or use harsh chemicals.
to be cleaned. Be sure to pick a day or days whereIf the block paving had sand joints, it will be
the weather is likely to be dry.necessary to reapply kiln dried sand after washing. 
The first step to cleaning block paving is to removePurchase kiln dried sand and work into joints with a
any large weeds that may be growing in joints. Oncesoft broom. Once the sand is reapplied, seal the block
the weeds are removed, apply a fungicide to removepaving to prevent staining and mold and moss
algae, mold and moss. It is helpful have a chemicalgrowth. The sealer may be applied with a roller or a
sprayer for this application since it will cover a largersprayer.
area more quickly. Be sure to use gloves and gogglesCleaning and sealing block paving should be repeated
when working with a chemical sprayer. Pre-treat oilevery few years and will keep the block paving
stains and other stains prior to jet washing. Manylooking neat and beautiful for many years.