What Weight Felt Paper Should be Used?

Felt paper, otherwise known as tar paper, is anaccidents have occurred when homeowners slipped
underlayment that is used between the decking andon the surface of felt paper that they were trying to
shingles. There are two weights: #15 and #30. It isinstall. To ensure that your roofing project is
important to make sure that you use the weight ofcompleted successfully, you should hire an
the paper that is recommended by the manufacturer.experienced roofing contractor and leave the work
When you hire a professional roofer to install, repairto the professionals.
or replace your roof, they will make certain that theyMany times leaks occur due to a tear or a rip in the
use the weight that is recommended by thefelt paper. If there is a hole or tear in the felt paper,
manufacturer of the roofing materials. This way youyou will most likely see stains or leaks in your attic. It
can be certain that you will not void anyis also important to realize that if you have excessive
manufacturer warranties that are applicable to yourwater, leaves or other natural materials accumulating
roof.on your roof that you are essentially creating your
Underlayments are extremely important to yourown compost pile. When this happens, the water
roof’s waterproofing abilities. This is where feltbecomes very acidic and if it seeps into the felt
paper comes in handy. However, it is important topaper, it will cause it to deteriorate. It is very
realize that felt paper can tear easily so it should beimportant that you have regular inspections on your
installed by an experienced roofer. In fact, becauseroofing system including the attic and if you suspect
of its texture, it isn’t recommended thatthat there are tears in your felt paper to have a local
homeowners try to install it. Many unfortunateroofer look into it for you.